PDK RMPBV2 Red Reader V2 Mullion High-Security Reader | RMPBV2

Dealer summary: The PDK RMPBV2 Red Reader V2 Mullion High-Security Reader is the mullion reader member of the new PDK Red Readers V2 line. It delivers OSDP and Wiegand output, a 2 in read range, IP65 weather resistance, and a cleaner install format for modern PDK Red deployments.

Best fit: Narrow-stile aluminum storefronts, frame-mounted access points, and clean credential-only openings where a slim reader is preferred.

Key dealer specs

• Part number: RMPBV2
• Bluetooth BLE, 125 kHz prox, and 13.56 MHz high-security credential support.
• Output: OSDP or Wiegand; OSDP multi-drop can reduce homeruns on multi-reader projects.
• Power: 5-24VDC; max draw is 95 mA at 12VDC.
• Environmental range: -31 to 150 F / -35 to 66 C, up to 95% humidity, with IP65 protection.
• Dimensions: 5.25" x 1.81" x 0.73".
• Credential security: MIFARE DESFire EV2 / EV3 high-security support.

Installation and commissioning notes

• Max cable length guidance: 500 ft on Wiegand with 18 AWG, or 1000 ft on OSDP RS485 at 12VDC with 22 AWG shielded twisted pair.
• Power-up sequences help verify comm mode: Wiegand-only = red blink once, OSDP-only = green blink twice, Auto-Detect = green blink four times.
• Non-keypad model for credential-first deployments where PIN entry is not required.
• UL-listed 5-24VDC access control panel required. Wire colors and termination guidance are published in the official install guide.

Dealer verification checklist

• Confirm controller compatibility and whether the job should be wired in OSDP or Wiegand.
• Validate mounting surface and footprint for the selected mullion reader form factor.
• Confirm whether the opening needs credential-only operation or PIN capability.
• For high-security deployments, align reader choice with Red credentials and controller strategy.

Official resources

• PDK Red Readers V2 product page
• PDK Red Readers V2 datasheet
• PDK Red Readers V2 user manual